xTool D1 Pro 20W Higher Accuracy Diode DIY Laser Engraving & Cutting Machine

Brand:

xTool

$1,199.99

xTool Laser Engraver D1 Pro 20W Selling Point:

Laser power output: the best 20W is laser module, 10mm bass 2ood cutting in one-pass.

TOP engraving speed: Engraving speed up to 400mm/s. It is a worthy and good business support for business makers to rapid mass production, and model artworks with high difficulty and high precision requirements..

340+ Engraving Colors: By chemically reacting stainless steel, D1 Pro 20W enables colorful pattern engraving with up to 340+ colors. Make your artwork colorful.

Newly upgraded xTool Creative Space software: Unlimited use of 500+ sample projects, 30+ fonts, and default parameters for common materials..

Improve The Accuracy to The Extreme:engraving/cutting accuracy to reach 0.004 inches, repositioning accuracy down to less than 0.007 inches.

Product Option:

Suitable Model

xTool D1 Pro 20W Gray

xTool D1 Pro 20W Red + RA2 Pro + Risers (8 Packs)

xTool D1 Pro 10W Gray + RA2 Pro + Risers (8 Packs)

xTool D1 Pro 10W Red

Frequently Bought Together (4)

xTool RA2 Pro for D1 Pro 4 in 1 Laser Engraver Rotary

Price: ~~$499.99~~ $349.99

View Addon »

xTool D1 Pro Gray Extension Kit for Laser Engaving Cutting Machine Increase to 200% Engraving Size 936*432mm

Price: $259.99

View Addon »

xTool Honeycomb Working Panel Set for D1/D1 Pro Laser Cutting Thicken Honeycomb Worktable Size 50 x 50 x 2.2 cm

Price: $199.99

View Addon »

xTool Pro Air Assist Set for Laser Engraver D1/D1 Pro Low Noise Easy to Install Clean Surface & Smooth Edge

Price: $239.00

View Addon »

Order Now:	Free Shipping
Price:	$1,199.99
Availability:	In Stock

Qty

Meet All Your Needs
xtool 20w

The World's Most Powerful 20W Diode Laser
xtool d1 pro 20w

10mm BassWood Cutting in One-PASS

8mm Black Acrylic Cutting in One-PASS

Higher Productivity at A Higher Speed
laser speed 400mm/s

Improve The Accuracy to The Extreme
all-steel wheel

Why D1 Pro Provide the Highest Accuracy
high accuracy engraving cutting d1 pro

Easily and Precisely Adjust the Focus

Easy Focus Adjustment

Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever.

Precise Focus Adjustment for Thicker Cutting

To ensure the cutting capacity of the laser, the focal length can be adjusted by lifting or lowering the laser module according to the thickness of the materials.

Invigorate Your Creations with 340+ Colors
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal.
laser engraving

Limit Switches in All Directions

Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions.

Safe to Use
The emergency stop will be triggered by the detection of flames, smoke and tipping.

Get started quickly with our user-friendly software: XCS

Updating Project Files
Batch Processing with Circular Array
Default Working Parameters for Materials

Compatible with mature engraving software: LightBurn

The layout, editing, and control software for common laser engraver. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.

Details Matter

New Protective Design for Laser

New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.

Large Engraving Area

A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.

The Risers

Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.

Just Connect

You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.

Genius Ideas from xTool Fans
xtool d1 projects

- 10mm Basswood Cuts in One-PASS by 20W Highest Power Diode Laser

- Up to 400mm/s Working Speed to Increase Your Productivity

- Finer Details by Ultra-fine Compression Spot

- Higher Accuracy and Stability by Durable Mechanical Structure

- Compatible with LightBurn and 3 Types of Connection(USB,WIFI,TF card）

- Auto-Stop if detects Flame/Moving or Tipping for Extra Safety

Specification:

Type: xTool D1 Pro-20W;

Machine Power: 120W

Laser Electric Power: 84W

Laser Module Output Power: 20W

Laser Spot: 0.08*0.10mm

Routing Speed: 400 mm/s;

Working Area: 430 * 390 mm (16.93 * 15.35 inch)

Max. Workpiece Height: 50 mm (2 inch)

Max. Workpiece Height with X risers: 50mm+X*45mm（each set riser height column）

Connecting Interfaces: USB/Wi-Fi/TF Card

Certification: FCC / FDA / CE

Operating Systems: Windows/macOS/Android/iOS

Control Software: xTool Creative Space / LightBurn

File Type(s): SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc.

Features:

Limit Switches Auto-Identifying Boundaries in All Directions

- Limit switches on both the X and Y axis can accurately locate the working coordinates of the laser head, updating you on the processing progress in software.

Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal.

- The color of the metal engraving will no longer be limited to black/grey. Your creativity will be brought to the next levels with 340+ colors.

Instant Stop when machine detects flames

Instant Stop when machine is moving or tipping

Compatible with Software of All Levels,Quickly Started with xTool Creative Space

Compatible with mature engraving software: LightBurn

- The layout, editing, and control software for common laser cutter. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.

Details Matter:

1. Minimize Lens Pollutions by Optimizing Air Outtake

New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.

2.Large Engraving Area

A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.

Package Include:

1 x xTool D1 Pro 20W Machine

8 x Raisers

1 x RA2 pro Rotary Roller

Feature:

Type : Xtool D1 Pro-20W

Laser Spot :0.08*0.10mm

Routing Speed:400mm/s

Working Area:430*390mm(16.93*15.35In)

Maximum thickness that can be cut in one pass

Basswood:10mm

Black Acrylic:8mm